产品详情
所在位置: 首页> 产品目录> 台湾华仪>

华仪7132耐压绝缘测试仪

  • 产品名称:华仪7132耐压绝缘测试仪
  • 产品型号:华仪7132
  • 产品厂商:台湾华仪
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍
华仪7132耐压绝缘测试仪特点: 三种测试功能可供选择:ACW, DCW, IR 大型128×64 Graphic LCD 显示器 单机可与7315接地阻抗测试器连结符合标准19英吋仪器架 可同时进行100台的联机测试 内建10组程序记忆、每一组3个测试步骤可进行程序记忆步骤的连结测试

华仪7132耐压绝缘测试仪

的详细介绍


华仪7132耐压绝缘测试仪特点:
三种测试功能可供选择:ACW, DCW, IR
 
大型128×64 Graphic LCD 显示器
 
单机可与7315接地阻抗测试器连结符合标准19英吋仪器架
 
可同时进行100台的联机测试
 
内建10组程序记忆、每一组3个测试步骤可进行程序记忆步骤的连结测试
 
砖利快速放电功能,可于0.2秒将被测物上的电能放完,确保人员安全
 
砖利防高压触电功能,当人体误触时可立即中断输出
 
开机自我检测功能的测试,可于测试前进行判定各项测试功能是否正常
 
前面板软件输入校正
 
时间与日期的设定,可设定校正时间及预警时间提醒使用者
 
内建PLC Remote遥控界面
 
键盘锁定功能
 
安全锁定功能
 
体积小、重量轻
 
型号选择:

7130 AC Withstand VoltageTester
 
   
 
7132 AC Withstand Voltage / Insulation Resistance Tester
 
   
 
7140 AC/DC Withstand Voltage Tester
 
   
 
7142 AC/DC Withstand Voltage / Insulation Resistance Tester
 
   
 

 
规格

SPECIFICATIONS
MODEL 7130 7132 7140 7142
AC WITHSTAND VOLTAGE
Output Rating 5KVAC/20mA
Range Resolution Accuracy
Output Voltage, KVAC 0-5.00 0.01 ±(2% of setting + 5V)
Output Frequency 50Hz/60Hz ±100ppm, User Selection
Output Waveform Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5
Output Regulation ± (1% of output + 5V), From no load to full load
SETTINGS
Max-Limit AC Current, mA 0 - 20.00 0.01 ±(2% of setting + 2counts)
Min-Limit AC Current, mA 0 - 9.999 0.001 ±(2% of setting + 2counts)
Ramp Up Time, second 0.1 - 999.9 0.1 ±(0.1% + 0.05sec)
Ramp Down Time, second 0 - 999.9 0.1
Dwell Time, second 0, 0.3 - 999.9
(0=continuous)
0.1
Arc Detection 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
DC WITHSTAND VOLTAGE (7140,7142 ONLY)
Output Rating 6KVDC/7500µA
Output Voltage, KVDC 0 - 6.00 0.01 ±(2% of setting + 5V)
Output Ripple <5%(6KV/7500µA at Resistive Load)
SETTINGS
Max-Limit DC Current, µA 0 - 7500 1 ±(2% of setting + 2counts)
Min-Limit DC Current, µA 0 - 999.9 0.1 ±(2% of setting + 2counts)
Ramp Up Time, second 0.1 - 999.9 0.1 ±(0.1% + 0.05sec)
Ramp Down Time, second 0, 1.0 - 999.9 0.1
Dwell Time, second 0, 0.4 - 999.9
(0=continuous)
0.1
Arc Detection 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
Discharge Time ≦ 200 msec
INSULATION RESISTANCE (7132,7142 ONLY)
Output Rating 1KVDC/9999MΩ
Output Voltage, DCV 30 - 1000 10 ±(2% of setting + 5V)
SETTINGS
Max-Limit Resistance, MΩ 0, 1 - 9999 (0=OFF) 1 ±(2% of setting+2counts)at 500-1000VDC,
1 -1000 MΩ
 
Min-Limit Resistance, MΩ 1 - 9999 1 ±(5% of setting+2counts)at 500-1000VDC,
1000 -9999 MΩ
±(8% of setting+2counts)at 30-500VDC,
1 -1000 MΩ
Ramp Up Time, second 0.1 - 999.9 0.1 ±(0.1% + 0.05sec)
Ramp Down Time, second 0, 1.0 - 999.9 0.1
Delay Time, second 0, 0.5 - 999.9
(0=continuous)
0.1
MEASUREMENT
AC/DC Voltage, KV 0 - 6.00 0.01 ±(1.5% of reading + 1count)
DC Voltage, V (IR only) 30 - 1000 1 ±(1.5% of reading + 5V)
AC Current, mA 0 - 3.500 0.001 ±(2% of reading + 2counts)
3.00 - 20.00 0.01
DC Current, µA 0 - 350.0 0.1 ±(2% of reading + 2counts)
DC Current, mA 0.300 - 3.500 0.001
3.00 - 7.50 0.01
Resistance, , MΩ 1 - 9999
(Auto Range)
0.001
0.01
0.1
1
±(2% of setting+2counts)at 500-1000VDC,
1 -1000 MΩ
±(5% of setting+2counts)at 500-1000VDC,
1000 -9999 MΩ
±(8% of setting+2counts)at 30-500VDC,
1 -1000 MΩ
GENERAL
Input Voltage AC 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A
PLC Remote Control Input : Test , Reset , Memory1.2.3 , Interlock
Output : Pass , Fail , Processing , Reset-Out
Interface(Option) RS485 Interface
Memory 10 memories, 3 steps/memory
Graphic Display 128×64 Graphic LCD
Safety Built-in Smart GFI circuit,GFI trip current 450?A max, HV shut down speed: <1mS
Key Lock To prevent unauthorized alteration of the test Parameters
Calibration Build-in software and external calibrated meters
Verification Build-in software driven verification menu to test fault detection circuits
Alarm Volume Setting Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume.
Environment 0-40℃, 20-80%RH
Dimension/Net Weight 215mm(W)×89mm(H)×370mm(D)/ 10Kg
STANDARD ACCESSORIES
Power Cord(10A) ×1
Fuses ×2 (Including a spare contained in the fuse holder)
Interlock Disable Key(1505) ×1
Hipot Test Lead ,1.5m(1101) ×1
Hipot Return Lead ,1.8m(1102) ×1
*product specifications are subject to change without notice.
标题:
内容:
联系人:
联系电话:
Email:
公司名称:
联系地址:
 
 
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!